Here's how to control MAC address access for your Orbic Speed 5G.
MAC Filter is an advanced setting. Contact your local IT admin prior to altering it.
If turned on, only the devices added to the MAC address filter list can access your Orbic® Speed 5G™ primary Wi-Fi network.
This MAC filter has no effect on the guest Wi-Fi network or USB devices.
From the top menu, click
Configuration
.
From the left menu, navigate: .
Tap the dropdown menu next to MAC Filter and select
Enable
.
From the 'Confirm' prompt, tap
OK
to confirm.
Once MAC Filter has been enabled, navigate: .
: Only allows devices with the selected MAC address to connect
: Only denies devices with the selected MAC address from connecting to the internet.
Do any of the following:
Add a device to the list:
Configure/enter the following:
Click
OK
next to the MAC address field.
Click
Save Changes
(lower-right).
Delete a device on the MAC filtering list:
Click
Delete
next to the appropriate MAC address.
