Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kazuna eTalk MYFLIX - Common Camera Settings

2025-07-07 06:57:12.461
Here's info on common camera settings (e.g., flash, timer, front / rear camera, etc.) for your eTalk MYFLIX.
If you need to adjust common camera settings (e.g., flash, filters, etc.) for your Kazuna eTalk MYFLIX follow these step-by-step instructions.
For additional camera support, refer to the Camera section of the user guide.
Common Camera settings detail
Expand All
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Do one of the following:
    • Tap the
      Camera icon
      to take a picture.
      Camera icon
    • Tap the
      Camcorder icon
      to record a video.
      Video camera icon
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Tap one of the following camera modes:
    Mode icon
    • Automatic
    • HDR
    • ProMode
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Tap one of the following filters:
    Apply filter
    • Mono
    • Sepia
    • Negative
    • Solarize
    • Posterize
    • Aqua
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Tap the
    Camera Facing icon
    to switch between rear and front camera.
    Camera facing icon
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Tap the
    Flash icon
    to set the flash to automatic, on or off.
    Flash icon
  1. From a Home screen, tap the
    Camera icon
    Camera icon (at the bottom).
  2. Tap
    Settings
    .
     Settings icon
  3. Tap any of the corresponding switches to turn the following options on Switch on or off Switch off :
    • Camera / Video Settings:
      • Continuous Shot
      • Redeye Reduction
      • Shutter Sound
      • Image Stabilization
    • General
      Tap
      Storage
      then select Phone or SD Card.
    • Picture size
      Tap
      Picture size
      then select the preferred setting (5M pixels, 3M pixels, etc.).
      Selected when a dot is present.
    • Picture quality
      Tap
      Picture quality
      then select the preferred setting (Low, Standard, High).
      Selected when a dot is present.