Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Inseego MiFi 2100 5G UW - GPS over Wi-Fi

2025-07-08 03:01:09.566
If you need GPS on your MiFi 2100 5G UW for use with computer apps, view this info.
  • The GPS over Wi-Fi setting allows your Inseego MiFi® 2100 5G UW to provide a GPS (NMEA) stream to a Windows or Mac computer.
    This is only useful if running an app that is capable of utilizing a NMEA GPS stream (e.g., Microsoft Streets & Trips, etc.).
  • To utilize GPS over Wi-Fi, a driver must be installed on the computer.
Expand All
  2. From the Settings section, click the
    Navigation arrow
     Navigation arrow (lower-right) to open the Settings page.
  3. Click the
    GPS
    tab.
  4. Slide the
    Enable GPS switch
     to turn on Switch on or off Switch off .
    If presented, review the GPS agreement and click 'Yes' to continue.
  5. Slide the
    Turn on GPS over Wi-FI switch
     to turn on or off.
  6. While the GPS over Wi-Fi (NMEA) switch is on, launch the GPS-enabled app on the computer then configure it to utilize a NMEA port or GPS receiver.
    Refer to the app's help menu or contact the app developer for assistance.
    Once the app has found the NMEA port / GPS receiver, it should report "Waiting for your location" or similar until a GPS fix is obtained. After that, it uses or displays the current GPS location.
  2. From the Settings section, click the
    Navigation arrow
     Navigation arrow (lower-right) to open the Settings page.
  3. Click the
    GPS
    tab.
  4. Click the
    Download Driver
    button.
  5. Locate the file in the downloads folder of your computer to complete installation.