Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wireless Home Phone (LVP2) - Insert / Remove SIM Card

2025-07-05 14:01:08.091
Here's how to properly insert or remove the SIM card for your Wireless Home Phone (LVP2).
Expand All
Do not attempt to insert/remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.
The Wireless Home Phone (LVP2) comes with the SIM card installed.
  1. Ensure the device is powered off.
    Power button
  2. Remove the battery cover.
    Remove the battery cover
  3. With the gold contacts facing down, align the card (notch first) then gently push the card in until it clicks into place.
    SIM tray
  4. Replace the battery cover.
    Close the battery cover
  1. Ensure the device is powered off.
    Power button
  2. Remove the battery cover.
    Remove the battery cover
  3. Gently push in on the card, then carefully pull out the SIM card.
    The SIM card slot is spring-loaded, which utilizes a push-push type SIM card slot.
    If applicable, refer to Insert the SIM Card section above.
    Remove SIM
  4. Replace the battery cover.
    Close the battery cover